Eduroam FAQ
In this FAQ you will find tips and solutions for problems with connecting to eduroam. Look below to find general tips, and below that for specific tips for your system.
Since the summer of 2021, there is a new WiFi network for students and employees of the UU: Utrecht University. We advise connecting to that new network.
-
General
General tips for the use of eduroam.
-
Common problems when connecting to eduroam can be solved via the so called CAT-tool.
- Connect to the internet via cable
- Browse to https://cat.eduroam.org and click on eduroam user: download your eduroam installer”
- Click “Utrecht University”
- Follow the steps to configure eduroam on your device.
- Log in with your Utrecht University mail address.
Some virusscanners may cause connection problems. For instance, you might be succesfully connected but have no internet access, or you can’t connect at all.
We advise to temporarily disable your virus scanner to troubleshoot the problem and try to connect to eduroam again. If you succeed in connecting to eduroam, refer to your virus scanner documentation and settings to solve the problem.
Don’t forget to turn your virus scanner back on.
-
Microsoft Windows
Below are tips for eduroam and Windows.
-
When having problems, first check the FAQ “Configure eduroam via the Configuration Assistant Tool”. If that did not solve the problem, continue reading.
Sometimes you can’t connect after entering your credentials (full UU e-mail address and password). This is common among students or staff who have studied or worked in the past at another University or school.
You can solve this by performing the following steps:
Step 1 – Right-click the Start button and choose “Run” / “Run”
Step 2 – Type the following and press Enter: netsh wlan delete profile name=”eduroam”
Step 3 – Type Exit
Now try again (see instruction above).
For advanced users: You can use the command “netsh wlan show profiles” to see which network profiles are present on your laptop. It is advised to delete obsolete profiles of other educational institutes.
• Remove the old eduroam profile from the Windows network settings.
• Right-click the wifi icon in the Windows taskbar and select Network & Internet Settings
• Open Network and Sharing Center
• Click Set up a new connection or network
• Click Manually connect to a wireless network
• Enter “eduroam” as the Network name and set the Security type to WPA2-Enterprise and click Next
• Click “Change connection settings” and select Change adapter settings
• Open the Security tab and check if the settings match the screenshot below
• Open Settings
• Check Validate server certificate
• Check Connect to these servers and enter radius.uu.nl as the server address
• Check DigiCert Assured ID Root CA
• Click Configure and uncheck Automatically use my Windows logon name and password and close all windows with OK
• When connecting to eduroam you should be prompted for your credentials.You should now be connected to eduroam. Please visit one of our IT-desks if you are still having issues.
You will have to ‘forget’ the network before you can connect again with your new credentials. You can do this by following the steps below:
- Right click on the Wi-Fi icon on your taskbar
- Go to “Network and Internet Settings”
- Go to “Manage know networks”
- Select eduroam and click on “Forget”
- Now turn your Wi-fi off an on
- When you reconnect with eduroam it will ask for your credentials: now fill in your UU email address and new solis-password.
-
Mac OS, iPhone and iPad (Apple)
Do you have a Mac, iPhone or iPad? Look in this section for tips surrounding eduroam. These are written expecting you to have the latest version of the operating system.
-
Since iOS version 9, a feature called “Wi-Fi assistence” has been introduced. When this feature is enabled, your phone or iPad (if equipped with SIM card) may use more mobile data (3G/4G) unexpectedly.
We advice to disable this feature. To do so, watch the video below or:
Go to settings, and “Mobile network”. Scroll down all the way, and uncheck the box “Wi-Fi assistence”.
Video:
-
Android
Do you have an Android phone or tablet?
The look of Android differs depending on the manufacturer or model. The look of a Samung phone will look different than for example Motorola or LG. The function will generally be the same, but it can happen that the tips in this section won’t apply to you.
-
Use the following setting to connect to eduroam:
– For EAP choose: PEAP (this is standard)
– At verification phase 2 choose: None
– If the CA-certificate says “(not-specified)” leave it that way, if not choose “Don’t validate”
– At identity fill in your own UU e-mail address.
– You can leave anonymous identity empty
– Password: your own solis-password
– Click on “Connect” and start using eduroamYou can select “Connect automatically” if you want your phone to remember the connection.
Go to the ‘Settings’ of your phone, and proceed to ‘Wi-Fi’. Tap on ‘eduroam’ (You might need to tap and hold), and select ‘Forget Network’. After this, you can connect again using this manual.
Android has the option to automatically switch between WiFi and mobile data.
To prevent unexpected costs we advice to turn this option off.
Open the Wi-Fi settings
Press “Advanced”
Turn off “Switch to mobile data” -
Ubuntu (linux)
-
For example when the certificate for eduroam gets updated, you will have to reconfigure eduroam. First, delete the old profile for eduroam using the following steps:
– Click the Wi-Fi icon in the top-right of your screen
– Click “Edit connections…”
– Click “eduroam”, and then “Delete”. Confirm this by pressing “Delete” again.
– Close this window
– Connect to eduroam again. The manual for this is currently being updated and will be available again as soon as possible.
Last modified: 9/06/2022